Our Affiliate Web Sites:
Standard Feature: Over 200 standard models of glazed structures or we can customize any structures:
Benefit: Standard sizes and models save time and money but our ability to be customize our units is second to none. We specialize in one of a kind glazed structures.
Standard Feature: Thermally Broken Dividers.Exterior metal does not touch interior metal:
Benefit: Reduces transfer of heat and cold. Framing members have a polyurethane section that separates the aluminum components. Reduces condensation and frost collecting on the aluminum frame. A common problem on standard aluminum frame systems.
Standard Feature: Internal "Tear Duct" Weepage system to drain moisture:
Benefit: Our systems have been designed so moisture will weep to the outside. All structures will create condensation and our system has been to deal with it. Our primary glazing members have 4 weepage channels! When installed correctly our system will drain moisture down to the sill where its then forced to the outside.
Benefit: We believe people want sunrooms and solariums so they can enjoy their view. Most sunrooms use sliding windows at eye level, causing you to look through a screen and metal. We recommend placing our awning windows below your site-line. This allows you to view the great outdoors clearly!
Standard Feature: Built-In Shade Tracks designed for our Comfort Glide Shade System:
Benefit: We realize that people only enjoy the light and suns warmth about half the time. The other times glazed structures should be insulted to reduce heating or cooling costs. Our built in tracks allow quick and easy installation of our Comfort Glide Shade System. This will reduce your overall investment and simplify the process should you decide to add shades.
Standard Feature: Concealed Stainless Steel Fasteners:
Benefit: Resists rust and are completely hidden from view by our muntin and bar caps. Exposed fasteners are an eye soar. They allow dirt and moisture stain trails below each one.
Standard Feature: Unique Built-In Accessory Tracks:
Benefit: Easily hang light-weight signage, flags, lights, fans, plants, banners, etc. without drilling unsightly holes.
Standard Feature: Standard 36" Wide Bays (38 ¼" O.C.)
Benefit: Our bays are 20% larger than most competitors. They allow 3' windows and hinged doors, As well as 6' sliding patio and French doors, to give the best view day or night.
Standard Feature: Glazing ribs are extruded from 6061-T6 aluminum, non-structural from 6063-T6 with 3", 5 ¾" and 8 ½" sizes:
Benefit: This rigid framing system is structurally sound and can span larger depths than most competitors options without support. (Free span depends on load requirements)
Standard Feature: Closed Cell Tape on all Horizontal Members:
Benefit: Will not allow water or moisture to penetrate.
Standard Feature: Quad-fin gaskets, Made from EDPM rubber. Closed-cell tape in horizontal sections:
Benefit: Provides the best protection against leaks. Will not shrink, expand, or get brittle over time.
Standard Feature: Components are pre-cut, pre-drilled and labeled at the factory:
Benefit: Stream lines the installation process, saving time and money by requiring less on-site fabrication.
Standard Feature: Tempered 15/16" insulated safety glass. With several Hi-Performance options:
Benefit: Tempered safety glass is strong and safe. Most windows are made out of Annealed glass which can break easily and can be a serious safety concern.
Standard Feature: SilverCoat E-366, E-172, E-240 Hi-Performance Glass:
Benefit: Allow you to efficiently heat and cool your home. Now you can enjoy a glass roof.
Standard Feature: Bent spacer corners and dual-seal technology:
Benefit: A single, non-corner splice instead of jointed corners and two seals dramatically reduce the chance of seal failure.See our warrant for more info.
Standard Feature: Hi-quality frame finishes are electrostatically applied and custom finishes are optional and meet AAMA standards for Fading and Chalking:
Benefit: Frame finishes do and will look great for years. Anodized and Kynar offer valuable options.
Standard Feature: Seamless Bar-Cap Covers:
Benefit: Eliminates seams in frame that attract moisture making it look great and it hides the screws.
Standard Feature: Factory fabricated windows and door specially designed for our glazed structures:
Benefit: Ensures high quality glazed structure grade accessories for visual appeal and long lasting energy efficiency.
Standard Feature: Comfort Glide Shade System with sun screening or insulated shades:
Benefit: Optional accessory to reduce direct sunlight and to enhance the interior design of your glass enclosure.
You’ll enjoy our unique features for decades!
Type the code from the image